photo HomeHeaderPages_zps121b83d7.jpg  photo AboutHeaderPages_zps6faf416f.jpg  photo ContactHeaderPages_zps0989aee4.jpg
Showing posts with label ClosetCaseFiles. Show all posts
Showing posts with label ClosetCaseFiles. Show all posts

Sunday, May 3, 2015

'Wearable Muslin' White Denim Ginger Jeans

Pattern: Ginger Jeans - Closet Case Files
Fabric: White Stretch Denim - JoAnn's

It's still quite unbelievable to me that I'm sitting here in my first pair of jeans ever - the jeans that I'm probably going to wear everyday this week if I'm being honest. Oh man, making these was equal parts great and awful. So many things went wrong most likely because I was distracted by whatever Netflix show I was watching. That's the point of making a muslin right? To figure it all out before you make the real thing. Luckily these turned out wearable but just barely. The nice thing is that I did feel like i learned a lot and I know now what fitting changes I will make for next time. And there will be a next time because I have 6 yards of raw denim waiting on my shelf to be cut into - wahoo!

Connie is thinking 'Why are you taking so many pictures of your butt?'
Also can you see the dirt on my seat from riding my bike seat earlier? This is why I can't have nice things

I knew I wanted to make a muslin of these because I've never made jeans before and I was worried about all kinds of fitting issues. I decided to make view B first which is the high waisted skinny leg variation. Before sewing I basted all of the pieces together and everything seemed to fit just fine. What I completely ignored at the time was that the waistband was falling about 2 inches below my belly button. On the instructions there's a little notation that says that view B is supposed to fall right above the belly button. When I cut out my pieces I based them off of the finished measurements listed. I cut a 12 throughout the legs and hips but graded to an 8 up to the waist and I cut an 8 in the pockets as well. Big mistake number 1. This would've been fine if the rise of the jeans actually ended above my belly button where I fit into the size 8 measurements, but because these fit lower on me where they ended was about a size 10 measurement. So when I tried them on after sewing them pretty much together minus the buttonhole they were way too tight around my waist. The pockets were also to small and were gaping and bulging. Disaster.


 Luckily due to the 5/8" seam allowance I was able to unpick them at the sides and ease out the seam to a 1/4". I had enough leftover fabric to recut the waistband and all was good and well... until I pulled the slider off the zipper and then almost cried when i couldn't get it back on. I was ready to give up (I was not taking apart the fly front and resewing it with a new zipper) when I managed to get it back on. Crisis averted and all was well...except for the pockets which were still gaping because they were too small. So I decided to just sew them shut along the topstitching and voila! No more gaping - alas no more front pockets. Who uses front pockets anyways? The fix for next time is to lengthen the wait rise of the pants at the lengthen/shorten marking probably by an inch or two. I think I'll still cut a size 12 through the legs, grade up to a 10 through the hips & start of the torso and end at an 8 around my belly button. I think I'll err on the side of caution and cut the pockets at a size 10 next time just to avoid gaping issues.


The topstitching was actually really fun even though I need to work on going slowly and staying even a bit more. My basic Singer machine handled it like a pro and only needed some coaxing over the thicker fabric areas.


These took me about two and a half weeks to finish mainly because I only had time to sew in fits and spurts. I'm pretty sure they'll take less on this second pair. I'm going to take a break and sew something else in the meantime but then I'll be back with my second pair. I have some otter wax I've been holding onto that I think I'm going to use to make a waxed pair! Let me know what you guys think in the comments below.

Thursday, January 8, 2015

Upcoming Projects: Reupholstering and Sewing


I thought it would be fun to share some of the things I'm getting ready to start working on both sewing and re-upholstery related.

What a spoiled little pup!

One of the projects I'm most excited to get started on is re-upholstering this wingback chair. I found this thing on the side of the street last fall for free and carried it home where it then sat in the garage for the last couple of months. I finally brought it inside and into my room, and as you can see my roommates dog immediately tried to claim it as her chair. The chair is actually in great condition, the current fabric is a little stained and worn around the lower deck, but other than that it's fine. Right now my room mostly consists of things that are green, white, dark brown, and some gold and bronze. I really want to add some color into this 'reading corner' and I figured this chair would be a great place to start. 

 
I just purchased a whopping 8 yards of this medium weight cotton Hamilton Reflections Fuchsia fabric (shown above) from fabric.com. It was pretty pricey, but I had a giftcard (thanks grandma!) from Christmas that I decided to put to use. I think the print will be big enough to not be overly busy while adding in some pops of color that are complementary to the room currently. I definitely think it will modernize the chair for sure! I'm also planning on getting some fabric to make pillows in other fun bright colors that I can sit on the chair or throw on my bed. One of the fabrics is shown above, and it is also from fabric.com - I haven't ordered it yet. I just got an email saying the fabric is a going to ship a little bit behind schedule due to all of the orders they're currently processing (everyone probably got giftcards for Christmas). In the meantime I need to pick up some burlap, foam padding, staples, twine, dacron, and cording. I'm debating on whether i want to line the borders of the chair with cording/piping or use tacks. While I'm waiting on the fabric to get here I'm going to start stripping the chair and retying the springs and adding new padding. I'm so excited about this project.


Before they sold out last fall I managed to purchase one of the denim kits that Closet Case Files was selling with the ginger jeans pattern. The kit came with the pattern and enough denim and notions to make two pairs of jeans. The pattern is a skinny jean pattern that includes a normal rise and high waist variation. My kit came before I left for break, but I haven't gotten a chance to do anything with it. I need to get some muslin fabric to make up a practice version before I cut into the denim. Once I get the fit together I'm going to whip these up because I love jeans and two new pairs tailored to my body specifically sounds like a dream!



I also purchased a Watson Bra & Panty Kit from Blackbird Fabrics in the peach color (the photo above shows the sapphire and black kit). The kit includes enough fabric and notions to make one bra/underwear set. The pattern isn't included, but the pattern I'm planning to use (shown in the photo above on the left) is the Watson Bra and Bikini Pattern from Cloth Habit. The pattern includes variations for both a long line bra (shown above) and a regular length bra, both sans underwire. I've seen and read great reviews of this pattern and it looks like a pretty introductory pattern to the lingerie world of patterns. I've been accumulating quite a stash of knit fabrics that would work great with this pattern and I think it would be a good way to use those little scraps I always seem to have left behind.

I have a list of other patterns and fabrics I want to sew into things, but the stuff listed above is what I'm focusing on first and foremost. Plus this post is already long enough so I'll leave you with that. If you're really interested check out my pinterest page and look at the Patterns Fall/Winter board. Hopefully I'll have time to work on some things soon!

Monday, October 13, 2014

Scoop Neck High Back Long Sleeve Golden Nettie Bodysuit


Fabric: Mustard Yellow Solid Cotton Spandex Knit Fabric - Girl Charlee

If you're thinking another Nettie Bodysuit? The answer is an unapologetic yes! I'm loving this pattern for fall, mainly because wearing super stretchy knit fabric is really comfortable, but also because of how warm and cozy these bodysuits are. When the pattern came out earlier in the summer the thought of wearing a skin tight bodysuit in the hot sun wasn't really appealing to me. Now that the weather has cooled down though these things are great! This was a super quick sew considering that this was my second time working with the pattern, I'd previously made a three quarter length sleeve, high neck, low back version. It took about 3 hours from cutting the fabric to finish, enough time to finish House of Cards and start watching Bates Motel - which has a nice eerie feel to it, perfect for October.


This fabric had a lot of stretch to it similar to the fabric I used for my last Nettie. I wanted to avoid wrinkles around the midsection due to the fabric being too loose so I sewed an 8 through the bust, graded down to a 6 in the waist, and then went out to a 12 through the hips. There are no wrinkles this time and it doesn't feel too tight. I think I could get away with a 10 in the hips. The 12 fits nicely over my bottom, but it's not necessarily snug which isn't an issue just something I might tweak in the future. 



Last time I also had some problems with stretching under the armscye, but the high back seems to have rectified that and I didn't need to make any adjustments throughout the shoulder. Overall I really like the way the scoop neck fits and I like that it's not too low. I had considered getting some other fabric or stretch lace to make a contrasting binding around the neckline, but decided to just go the straightforward route this time. I have a fancy schmancy Nettie dress planned that I think I'm going to incorporate lace into.


Can we talk about how fun this skirt is by the way? Have a great week you guys!

Monday, October 6, 2014

Nettie Bodysuit Skirt Hack

Connie is definitely trying to eat my brand new skirt. BAD GOAT

Pattern: Nettie Bodysuit/Dress that I hacked into this skirt - Closet Case Files
Fabric: Eclectic Voyager Fabric - JoAnn Fabrics 

I had picked up about 2 yards of this fabric earlier this summer to make a dress with, but when my mom was in town I ended up making her a dress instead. I thought I'd have enough fabric left over to still make myself a dress but I didn't use my fabric wisely and instead only had enough to make a skirt.

My mom modeling her dress!



I started looking for knit skirt patterns and was considering purchasing the Mabel skirt by Colette Patterns but I held off. Later that same day I happened to be tracing new pieces for an upcoming Nettie Bodysuit and I realized that the dress variation bottom would probably be easily transformed into a skirt, the only piece I'd need to draft would be a waistband. So using the dress bottom and front pieces I started at a size 8 and graded up to a 12 about 4 inches down, to accommodate my derriere, and then went down to a 10. After sewing the two side seams together, which only took about 10 minutes, I cut a 2 inch wide piece two inches shorter than measurement of my waist skirt opening. I pressed it in half but only sewed one half (right sides together) to the raw edge of the waistband opening. This way when I folded it up and over I was able to slip stitch my loose edge of my waistband piece to the inside of the skirt and hide the stitching from attaching the waistband. I forgot to include seam allowances when cutting my waistband piece so instead of an inch waistband, it's about a quarter inch instead, but that's okay!




It was cold the morning I was taking these pictures so I threw a sweater on top of the Nettie bodysuit I'm wearing with the skirt. Even though I'm not a big pattern wearer I can see this skirt being a fun way to break up some of the 'dullness' that goes along with winter. Plus it looks great with a sweater thrown over or a shirt tucked in. The best part about pairing it with my bodysuit is that there was no bulk around the mid-section. The best part about knit skirts however, is how nice they look but how comfy they are, win win!

Monday, September 15, 2014

High Neck Low Back Nettie

I'd never thought I'd say this, but I'm the proud owner of a bodysuit!!!
Fabric: Hunter Green Solid Cotton Spandex Knit - Girl Charlee 
Pattern: Nettie Dress & Bodysuit - Closet Case Files

Life is funny sometimes. You get older, things change, people change, and sometimes at the age of 26 you find yourself wearing an adult sized onesie. It's like being a baby all over again except this time you remember it, not mention much more fashionable! Which is why we're calling it a bodysuit. That makes me think of something sleek, high fashion, and a little femme fatale. The designer of this bodysuit is none other than Heather Lou from Closet Case Files. Heather is the brainchild behind the Bombshell Swimsuit which I made previously this summer. Heather's also really nice and professional. I know this firsthand because I emailed her with some issues I was having and she got back to me ASAP, was helpful, and didn't make me feel like an amateur for having problems. It's scary when you first enter the sewing world and you see people pumping out amazing pieces of clothing with awesome technique. When you get treated like an equal it makes asking questions and chiming in a lot easier.


When this pattern was first released I actually wasn't that interested. But then I thought about things I complain about in my everyday wardrobe: bulky tucked in shirts and weird waist bulge when wearing a shirt tucked into a skirt. The Nettie really fixes all of those things because of how it's constructed and the body conforming nature of a stretchy knit fabric, not to mention the pattern includes variations on front and back neckline and arm lengths making it pretty versatile. If bodysuits still aren't your thing there's a variation for a dress included. This was my first time buying fabric from Girl Charlee and the only thing I didn't like was that you can only buy fabric in whole yards. I ended up getting 2 yards of this even though I only needed about 1 and a quarter, but that's okay because I had a gift card from my sister (thanks, Renee!).

Coco is side eyeing the crap out of my modeling skills

I chose to make the high neck and low back variation with 3/4 length sleeves because I have zero pieces of clothing like that in my closet currently. Overall this is super easy to make and the only time intensive part was sewing in the shelf bra and bra cups in order to have support and go sans bra due to the low back. When I was trying this on before sewing it all together I realized that for some reason the shoulder/armpit seam in the back was falling in front of my natural shoulder/armpit and causing there to be an excess of fabric underneath the armpit area. When I would put my arms down this extra fabric would get stretched to the back and pull around the front creating a bunch of armpit stretch ripples which you can see a little bit in the top picture. This is when I emailed Heather and asked her for tips/suggestions/and my ideas of what was happening. She gave me great advice and I ended up cutting the back piece armscye lower and re-cutting the sleeves to fit. It helped a little bit, but if you went up and looked in that top picture you can still see some stretching and ripples. I think this is mainly due to the low back cut, the breadth of my upper back, and the stretchy quality of the fabric. This fabric had over a 50% stretch and I think if it was a little less stretchy it might not have pulled as much, and the bodysuit would have fit more snug overall. I have plans to make a scoop neck, high back variation so I'm interested to see if that fits better or if these are adjustments I just need to make when working with this pattern. I sewed a size 8 through the bust and the waist and graded up to a 12 through the hips. I think next time, especially when working with fabric that has so much ease I'll grade down to a 6 in the waist because it was a little loose and I was getting some wrinkles when moving around. I like how this turned out and it feels really comfortable. I can see myself wearing this a ton this fall, especially layered with cardigans! I wore it to a bbq this weekend and got a bunch of compliments on the low back, and then a bunch more praise when I said that I made it. Always the best feeling.

Monday, July 7, 2014

Bombshell Swimsuit

Fabric: Merlot colored rayon/spandex blend from Colorado Fabrics
Pattern: Bombshell Swimsuit by Closet Case Files - $11.00

I made a Bombshell Swimsuit over the weekend (it was a really productive sewing weekend, I can't wait to share all of my makes). I'm not just calling it a bombshell because it's awesome or because I feel like a bombshell in it; it's the Bombshell Swimsuit pattern by Closet Case Files. I've never sewn a swimsuit before, and I wasn't particularly worried. Based on all of my blog stalking I've seen a lot of Bombshell swimsuits made by many other people and not only did everyone say that the pattern was awesome and the instructions easy to follow, but they all looked great in their swimsuits as well.

                         I probably could've cropped these pictures - hello computer chair! Hopefully it keeps the focus off of my butt

I went back and forth between the instructions and just following the pictures in the sewalong posts that Heather had done for the swimsuit. I'd say the whole printing of the pattern and cutting the pieces took the longest, and the actual sewing of the swimsuit only took about a day and a half. About halfway through once I had the bottom portion all put together I tried it on, only to realize that my lining fabric wasn't nearly as stretchy as my main fabric. BIG MISTAKE. I felt like a sausage. Luckily the way the suit is constructed you basically have a lined front part, with another front bodice covering, so I was able to cut out the lining of the front part without having to worry that the suit would become see through. After that the fit was much better because the main fabric had a lot of stretch. Besides that one little snafu this thing fits great. I feel like it looks really fancy and dare I say sexy without being too revealing. I feel like all of my parts are covered adequately and I don't have to worry about anything falling out. I was a little bit worried about all of the ruching, but it is very forgiving and I feel like this is the suit I would wear on a day when I'm not really feeling like having my stomach exposed to the world.
All that's left is to try it out in water, fingers crossed it doesn't fall apart!